Joined: Feb 07, 2005 Posts: 2743 Location: Florida XP: 14,186
Posted: Thu Nov 01, 2007 1:30 am Post subject:
Damnit!!! Was playing online when my damn 360 froze. Turned it back on and WHAM 3 red lights
The worst part is that Smackdown Vs Raw 2008 comes out in 2 weeks and we were gonna have a get tore up and whoop ass party. The guy on the phone said 3 to 4 weeks AFTER I send it out. _________________________________________________________
Got the xclamp fix on tonight and baked it and its working again now, ill see how long it lasts. _________________________________________________________
joho5 360-HQ Freak
Joined: Jan 22, 2007 Posts: 699 Location: Texas XP: 962
Posted: Thu Nov 15, 2007 4:26 pm Post subject:
ok, when i replace the clamps with machine bolts and washers...then i get to the step where you turn it on without a fan and wait till then lights go to 2 red lights do i then turn it off, or leave it on with the 2 lights? im confused, do i need to let it overheat with the 2 red lights for 3-4 minutes, or does it take 3-4 minutes for the lights to pop on?
priest108 V.I.P. Lifetime
Joined: Mar 09, 2007 Posts: 53
XP: 60
Posted: Thu Nov 15, 2007 5:19 pm Post subject: 2 Lights
2 red lights came up on mine within a couple of minutes. I then pulled the power as soon as the 2 red lights came on. Tightened the bolts up a little and then hooked everthing back up and fired that puppy back up. So far so good.
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia XP: 3,060,024
Posted: Thu Nov 15, 2007 11:53 pm Post subject: Re: 2 Lights
priest108 wrote:
2 red lights came up on mine within a couple of minutes. I then pulled the power as soon as the 2 red lights came on. Tightened the bolts up a little and then hooked everthing back up and fired that puppy back up. So far so good.
You can watch the video on the official x-clamp-fix.com website anyway if you r unsure on anything..
Once you have fitted the xclamp and leave the fans disconnected It sometimes takes over 2-3 minutes before the console overheats.. I think it took near 4 minutes for mine.
Ya mine wouldn't work till i got mine so tight the bit was slipping out of the hole. _________________________________________________________
joho5 360-HQ Freak
Joined: Jan 22, 2007 Posts: 699 Location: Texas XP: 962
Posted: Fri Nov 16, 2007 3:29 pm Post subject: Re: 2 Lights
priest108 wrote:
2 red lights came up on mine within a couple of minutes. I then pulled the power as soon as the 2 red lights came on. Tightened the bolts up a little and then hooked everthing back up and fired that puppy back up. So far so good.
this is what i did also, i was just wondering if i was supposed to leave it going with the 2 red lights blinking or just immediately turn it off when it went to 2 lights (which i did) and tighten it down. that worked, but i wanted to make sure i did the best method.
ps. i didnt see an instructional video on that website.
endless 360-HQ Genius
Joined: Jul 28, 2005 Posts: 1013 Location: Out in the Boonies XP: 450
Posted: Fri Nov 16, 2007 5:47 pm Post subject: Re: 2 Lights
joho5 wrote:
priest108 wrote:
2 red lights came up on mine within a couple of minutes. I then pulled the power as soon as the 2 red lights came on. Tightened the bolts up a little and then hooked everthing back up and fired that puppy back up. So far so good.
this is what i did also, i was just wondering if i was supposed to leave it going with the 2 red lights blinking or just immediately turn it off when it went to 2 lights (which i did) and tighten it down. that worked, but i wanted to make sure i did the best method.
ps. i didnt see an instructional video on that website.
It says to let it go for a few minutes once it hits 2rol, but in your case it worked fine.
joho5 360-HQ Freak
Joined: Jan 22, 2007 Posts: 699 Location: Texas XP: 962
Posted: Fri Nov 16, 2007 5:59 pm Post subject:
has anyone on here done an xclamp replacement with machine bolts and washers and had it work for a long time afterwards or works still currently...im just wondering the statistics of this holding up.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,051 | 
Guests: 5134 |
Members: 0
