Posted: Tue Jan 23, 2007 8:23 am Post subject: SICK WIRELESS CONTROLLER LED UNDER CASE MOD
The correct way to mod a wireless controller with LEDS
This circuit is not soldered into the controller at any point, do not solder to the controller board or the play and charge pins as it is not necessary and may cause future problems with the controller.
There's lots of tutorials for LED mods, but none like this one. Using the AA battery pack the LEDS are illuminated, with the play and charge they are not. This is because the circuit draws power from the battery coils at the base of the back of the controller.
The wires are sandwhiched into the coils, not soldered, so the circuit can be removed or replaced easily. Controller functions normally with or without LEDS based on which pack is used. Wire here for a 3V power source.
HERES A LINK TO THE PICTURES SINCE THIS POST EDITOR IS TOTALLY GAY AND WON'T LET YOU COPY AND PASTE:
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia XP: 3,060,024
Posted: Thu Jan 25, 2007 1:52 pm Post subject:
Thanks for the link.. But aren't you the author? lol
If you let us add it to our tutorials area i will obviously credit you and give a direct link to the source..
let me know.. We have one of the largest xbox 360 tutorials area on the net.. check them out here:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,506 | 
Guests: 4599 |
Members: 0
