Published byforahobby on 2009-08-24 Category: Xbox 360 | Page Views: 3651
Introduction
This tutorial will explain how to replace your standard xbox 360 case with a brand new case from Team XCM. Credit to Team XCM for this TUTORIAL! XCM make a great quality case replacement so be sure to check out the 360-HQ Xbox 360 Hardware area for more detailed information on the latest products for the xbox 360.
IMPORTANT!
Please note that opening your xbox 360 console will VOID your warranty.
What you will need
- XCM 360 CASE
- Unlock Kit
Let's get started
1. Here is a picture of a "XCM 360 full case". Replacement parts and installation tools are all displayed.
2. Install the DVD-ROM Replacement Cover as indicated in the diagram below.
3.Follow the direction as indicated by the arrows and use the tool as indicated to put on the screws.
4.Install the DVD ROM eject button as indicated.
5.Put together the XCM 360 full replacement case bottom and top panel.
6.Make sure the hooks and slots line up properly.
7.As indicated install the bottom heat sink cover.
8.As indicated in diagram A, first put down the front of the top heat sink cover. Then push down as indicated by diagram B.
9.As indicated to install the HD slot cover, push in the direction of (1) and down in the direction of (2).
The Berlin Apartment Confirmed For XBOX SERIES, PS5 And PC/STEAM Independent developer btf (@BTFcologne) revealed that their new first-person character-driven adventure, The Berlin Apartment, is in development for Xbox, PlayStation and PC. Watch the new trailer te..