Posted: Fri Apr 16, 2010 12:10 pm Post subject: Any idea what this is?
Hi guys,
I've recently had to reinstall a MOSFET and that went well But now i plugged in everything.. XBOX green light started flashing.. after a while it went 0022 which from what i understand could be a bridged solder join or damaged component near the cpu/gpu.
I dont even think there is such a part number for such a small peice, and the fact there is a million of them! haha. If anything, just do a quick search on google or something, like "How to change MOSFETS on CPU" and then carry on from there. those look like MOFSETS so thats what I'm guessing what they are, haha. Anyways, good luck, hope you get your good ole 360 fixed up ASAP! _________________________________________________________
You can contact me at: LegendaryFire -at- 360-HQ.com
Silentone 360-HQ User
Joined: Apr 03, 2010 Posts: 10
XP: 0
Posted: Sun Apr 18, 2010 7:45 am Post subject:
I forgot to mention the console was JTAG'd and working before i replaced the MOSFETs, Would JTAG have anything todo with the 0022?
I forgot to mention the console was JTAG'd before i replaced the MOSFETs, Would JTAG have anything todo with the 0022?
Error 0022: generally caused by a poor connection to the mainboard (cold solder joints/bridged solder joints). This can also be triggered by an error with the TSOP.
Sounds like a bad JTAG could have caused the problem. If you could even just find a Xbox 360 that doesent work on ebay or something, just get that, take the part that you need, and sell it for parts again! haha. _________________________________________________________
You can contact me at: LegendaryFire -at- 360-HQ.com
Silentone 360-HQ User
Joined: Apr 03, 2010 Posts: 10
XP: 0
Posted: Mon Apr 19, 2010 2:23 am Post subject:
LegendaryFire wrote:
Silentone wrote:
I forgot to mention the console was JTAG'd before i replaced the MOSFETs, Would JTAG have anything todo with the 0022?
Error 0022: generally caused by a poor connection to the mainboard (cold solder joints/bridged solder joints). This can also be triggered by an error with the TSOP.
Sounds like a bad JTAG could have caused the problem. If you could even just find a Xbox 360 that doesent work on ebay or something, just get that, take the part that you need, and sell it for parts again! haha.
Should i try reflowing the motherboard in the oven?
The jtag was successfully working before the error came about? Would it be the firmware itself or the diodes for the bridge?
SCARFACE Administrator
Joined: Feb 06, 2007 Posts: 2470 Location: Minnesota, USA XP: 58,502
Posted: Mon Apr 26, 2010 12:38 pm Post subject:
Did you fix that part under the cpu that is broken?
Do not do the oven thing this is not a good idea. _________________________________________________________ The one the only Scarface!!
Rodent V.I.P. Lifetime
Joined: Jan 11, 2009 Posts: 90 Location: Detroit,MI. XP: 5,318
Posted: Tue Dec 07, 2010 12:27 pm Post subject:
Looks like a (Surface Mount Device. SMD) resistor that is missing
Hey if you need, i got a board i could probably get to ya, maybe take some off of that one to fix yours? _________________________________________________________
Xbox 360 Arcade - Stock f/w - Case mod
Xbox 360 Arcade - Ixtreme LT+ V1.1 f/w
Xbox V1.0 - TSOP/Softmod UnleashX 40GB HDD
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,908 | 
Guests: 5034 |
Members: 0
But now i plugged in everything.. XBOX green light started flashing.. after a while it went 0022 which from what i understand could be a bridged solder join or damaged component near the cpu/gpu.
, Any idea of the replacement part number so i can have this console finally running again?
