Joined: Feb 06, 2007 Posts: 2470 Location: Minnesota, USA XP: 58,502
Posted: Thu Apr 01, 2010 10:57 pm Post subject: Xbox 360 Firmware or Dvd Problems Post here NON-VIP
Alright to make it faster and easier for everyone to even help any of you guys is listing these simple things otherwise your post probably wont get no response as you are to lazy to post all detailed information and then we have to go through asking all this and it takes more time on trying to help you with your problem then. Follow these to help us help you quicker and better.
If having a flashing problem please list this info
1. What Operating System Do You Use *Linux,XP,Vista,Windows7 also 32bit or 64bit.
2. What Type Of Xbox 360 Dvd Drive *List Below* *Rom Version*
-Samsung has 2 DVD Drives MS 25 and MS 28
-Hitachi has 9 DVD Drives 32/40/36/46/47/58/59/78/79
-BENQ VAD6038
-Lite-On has 4 Drives 74850c, 83850c, 83850c v2, 93450c
3. How are you Connecting this drive to your PC
-PCI Card
-OnBoard Sata
-Using the Connectivity kit to power the drive or using xbox 360 to power drive
-what type of connectivity kit if you are using one.
4. What JungleFlasher Version are you using?
5. Detailed Description of your Problem you are having not i have a lite-on drive and using jungleflasher and its not working. This kind of post myself will just ignore sorry i might be a ass but if your to lazy to describe in full what problem and not listing 1. 2. 3. 4. of what i said in this post , then i am to lazy to post back.
Xbox 360 DVD Drive Problems
1. List Type of Drive follow list at top of post.
2. Description of the problem you are having
If you are new and did not want to open your xbox to see what kind of dvd drive it is you have 3 options paying microsoft to fix this problem which cost probably $99.99 extends you another 1 year warranty unless you are in your 1 year then it is free. You could also try a laser cleaner to clean the laser with a disc this sometimes works for people, or opening the xbox 360 voids any warranty opening the dvd drive and cleaning the laser really good with rubbing alcohol soft though with like a que-tip usually fixes dvd reading errors.
Disc tray is not opening this is a cause by the rubber band inside that has been stretched over time usually on ebay about 50cents to $2.00 for this.
You can post here and i or anyone else that had the same problem if you give good description and details like listed we will be able to help you a lot faster and quicker thank you. _________________________________________________________ The one the only Scarface!!
larryhirotj 360-HQ Newbie
Joined: Apr 24, 2010 Posts: 1
XP: 0
Posted: Sat Apr 24, 2010 2:39 pm Post subject:
hi, can help me..i try to flash my xbox360 but is stuck and tell me wahat i do wrong...i have xbox360 with smasung ts-h943 f/w=ms25 h/w:005 ver. A and my comp is dell optiflex 755 windows xp professinal ...i have 4 sata connection on motherboard iam using junleflasher ver JungleFlasher.0.1.73.Beta... after i run jungle flahser the vendor says driver no detected so please help me..thank's
praveen3110 360-HQ Newbie
Joined: Apr 24, 2010 Posts: 1
XP: 0
Posted: Sat Apr 24, 2010 3:59 pm Post subject:
me too had a same problem . can anyone pls help me
SCARFACE Administrator
Joined: Feb 06, 2007 Posts: 2470 Location: Minnesota, USA XP: 58,502
Posted: Sat Apr 24, 2010 6:43 pm Post subject:
Read all first before trying.
Does your drive show up in jungle flasher under mtk flash32 before doing the vendor mode if not you will see in the top left area it says io port click that and it should show u a bunch of different ports u have to find the right one you connected your drive to so go down the list tell you find it. Then do the vendor mode.
Now if you see your drive when you are clicking on intro/device and it says drive not detected and has not been previous flashed before just hit intro/device mode again and it should say its in vendor mode.
Now if you have flashed your drive before and had the firmware xtreme 3.3 to ixtreme 1.4 you will need to do the active.iso disc burn it using img burn then put it in the drive and then wait about 30 sec and then hit vendor mode.
Now if you have ixtreme 1.5 to 1.61 You have to do the half way open tray trick so power the drive open the tray unhook the power to the drive push the tray half way in and then put power to the drive again and run jungleflasher then do the intro/device ID.
This should fix your problem are you connecting via xbox 360 or connectivity kit. Also you want to make sure everything is installed correctly like port 32 and everything otherwise you will have a hard time getting this to work. So go to your device manager area on xp and see if port 32 is installed correctly there should be no ??? on them _________________________________________________________ The one the only Scarface!!
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,430 | 
Guests: 5468 |
Members: 0
