Feel your sanity slip as darkness stalks you in one of the greatest stories ever told by video game. The nightmare world of Alan Wake sucks you headlong into a pulse-pounding cinematic ride of endless, overwhelming odds and all-pervading terror as you fight to uncover the mystery.
Light is your greatest weapon and only protection as darkness takes over everything and everyone and turns them against you. For an eerie prelude to the events of Alan Wake, watch the first episode of Bright Falls – The Series. Then stay tuned for more as the tension builds towards the release of a groundbreaking psychological action thriller!
PRE-ORDER LIMITED EDITION BOXED SET:
Come deeper into the nightmare of Alan Wake with the Limited Edition Boxed set.
Exclusive In-Game Audio Commentary and Hints by Remedy
144pg book “The Alan Wake Files” with short story written by Alan Wake and FBI dossiers
investigating events in Bright Falls
Exclusive Xbox bonus discs with Video Documentaries/Behind the Scenes
Today on HQ we review the "IntensaFIRE Rapid Fire Controller Mod" which was supplied by the guys from intensafirestore.com. The IntensaFIRE Rapid Fire Controller Mod Kit offers both a Solderless and Solder solution.
This week I had a great chance to review the Intensafire Mod and I must first thank the Intensafire Store for shipping us out the kit to review for our members here on HQ.
IntensaFire rapid fire kit for Xbox 360 requires no soldering, no wiring, no drilling and only takes 5 minutes to install. There simply isn’t an easier or more effective Xbox 360 controller mod than the IntensaFire for Xbox 360.
The IntensaFire modifies XBOX 360 controllers, allowing them to control 5-mode sleeper settings, and use customizable user programmable modes. It uses the existing Sync button to toggle. Advanced modifiers can use the included button as well. It also enables “dual rapid-fire” – usable in all XBOX 360 games, including gamer favorites: Left 4 Dead, the Call of Duty series, the Halo series, the Gears of War series, and Street Fighter.
IntensaFIRE For Xbox 360 Installation Video Guide:
IntensaFIRE Rapid Fire Mod Review
This week I had a great chance to review the Intensafire Mod and I must first thank the Intensafire Store for shipping us out the kit to review for our members here on HQ.
I will not be doing a lot of pics of this just the basic ones because in the online and also the instructions they give it makes it impossible to not see what you have to do to get this mod to work. It comes nicely packaged with the torx needed to take your wireless controller apart also comes with the conductive glue for those people that choose the no solder method or if you prefer soldering, for this review i did both the no solder way and the solder way. Also comes with a tooth-pick for the conductive glue.
Scale of Difficulty from 1 to 10 and 1 being easy and 10 being hard i give this a 1.5 only reason i rate it that instead of 1 is still some difficulty for beginners just like learning how to ride a bike for the first time.
Product Highlight:
-Works in all wireless controllers
-5 mode Sleeper Settings
- Customizable User Programmable Modes
- No need to add extra buttons to your controller uses the sync button to toggle through the different modes
-Usable in all Xbox 360 Games
-Does not cost $100's of dollars like most Xbox 360 Rapid Fire Controllers do.
- No Solder Solution or Solder what ever the buyer prefers the no solder solution is the use of conductive glue
-Usable in all Xbox 360 Games
-Extra mode button for advanced modification
-Includes the tools need to install no needing to buy tools unless you are soldering which usually anyone that is soldering has the things they need.
-Has pre-installed leds for each of the modes used no need to cut or add leds to know if your rapid fire mode is on.
-Quick painless install with instructions and also a online video install which is always nice for new people that are starting to get into the modding scene of customizing their gaming products as it really helps to see first hand what to do.
You will want scotch tape to hold the Intensafire down on the controller for installing with the no solder solution or solder solution if you do the no solder solution another good thing to have is a blow dryer if you want to get to gaming right away.
Alright i started off with the no solder solution which is provided in the Intensafire package, i have tried many different types of conductive glue and did not have success, but the one in the package works awesome i applied it on all eight points and used the hair dryer/blow dryer after 10-15mins of letting it dry I then put my controller back together and slapped COD-MW2 in the xbox 360 and tested it out. Everything work great i started off in a private match just messing around with the FAL and Desert Eagle making them fully automatic, was fun just messing around doing this for about 20-30mins then i messed around with the use-able programmable mode which could be tricky for beginners to understand if they did not follow how to use it but after you get your right setting that you like.
After i got it set right for what i wanted i went into a few hardcore games and just owned with it, i shoot really fast without rapid fire mods but this thing just blew me away with how fast it makes you shoot. I had a blast playing in hardcore then just for the fun of it i decided to go into softcore with it and still took out people left and right it felt like hardcore for me.
If you want that extra edge in FPS or any other games this is the mod you want to add to your Controller and at the $29.95 Price it can not be beat compared to those other ones people sell for $100 or even $15-$30 the cheap $15-$30 ones you see have all these different wires and chip that u have to place most also need a extra button added and almost 99.9% of them are in need of some sort of soldering skills and not everyone can solder or want to risk ruining their xbox 360 controller over it either. With the Intensafire No solder solution and cheap price and the way everything is setup and laid out instruction wise and also how it is made makes it well worth it for the non soldering and soldering modder and also offers more features then a lot of these other rapid fire controller mods out there.
Now after i tested it out with their no solder solution i took my controller back apart and took off the conductive glue and cleaned the Intensafire board really good then placed it back on the controller and if you guys out there prefer to solder the Intensafire Rapid Fire Mod is made for you too. I laid it back out on the controller board, fired up my soldering gun and that's all it wrote did the same eight points which are clearly labeled on the instructions that come with it and the online instruction video and that was it put the controller back together and tested it out on COD-MW2 i got the same best results as i did with the no-solder solution they provide with the kit.
All in all i have to say is this is one of the most easy installs i had to do and can easily be done by a new person into modding with no soldering skills at all or even for those hard core soldering people that likes their stuff soldered. Over all rating i give the Intensafire a 10 out of 10 for pure ownage and would recommend anyone looking for a rapid fire solution that has or does not have a budget to purchase one of these bad boys as it is affordable and easy to install and has a lot of features and you will not be disappointing with it at all.
Thank you again Intensafire Store for sending out the sample for us to review. I am for sure picking up a couple more of these when i get a some more controllers, i know my friends will want their own controllers done too.
If you want to order one of the best rapid fire mods out there then check out there store: www.intensafirestore.com
“Alan Wake” fans, now is the time to wake up! A new video from the upcoming psychological action thriller exclusive to Xbox 360 is available today, offering a creative insider’s look into “Alan Wake.” With the relaunch of AlanWake.com, look no further to get the most up-to-date information about the highly anticipated title set to launch in select countries in Europe on May 14, in North America on May 18 and in Japan on May 27.
Today, Microsoft released a new narrated trailer titled “Alan Wake: Building the Thriller,” encapsulating everything known about the psychological action thriller so far, while introducing the highly anticipated title to the uninitiated. Featuring never-before-seen footage containing previews of the unfolding mystery, even stalwart “Alan Wake” fans who have been following the title since it was first announced will want to examine the trailer for clues and details about the heart pounding thrill ride of “Alan Wake.”
To help bring the game to life, Microsoft has collaborated with well known merchandisers to offer a wide range of items for fans to show their adoration for “Alan Wake.” One such program is with CafePress, with others to be announced soon.
In a special collaboration with CafePress, the world's biggest destination for self-expression through merchandise, fans are now able to design and sell “Alan Wake” inspired products. Unique fan-created items will be available for purchase starting today with the full online store grand opening planned for April 16, 2010. From T-shirts and hoodies to water bottles, customize and outfit yourself with gear from “Alan Wake” at http://shop.cafepress.com/alan-wake to bring the game to life.
If you can’t wait to step into the world of “Alan Wake,” secure your Bright Falls Bonus Pack for exclusive “Alan Wake” content by pre-ordering your copy of the game now from participating retailers. A must-have for anyone intrigued by the game, the Pack includes Avatar gear like the “I Am Awake” T-shirt and an Xbox LIVE “Bright Falls” theme based on the game.
For those seeking to add the ultimate “Alan Wake” collection to their bookshelves, the Limited Collector’s Edition, designed to resemble a hardcover novel, comes packed with special bonus content including “The Alan Wake” Files collectible book – a 144-page book containing a short story penned by Alan Wake and a compilation of FBI dossiers investigating the mysterious events at Bright Falls; an exclusive Xbox LIVE theme and Avatar; video documentaries exploring the development of “Alan Wake”; in-game commentary and hints from Remedy; and much more.
Bringing a new style of storytelling in this dynamic new title exclusively for Xbox 360, “Alan Wake” is developed by Remedy Entertainment, the renowned original developers of the successful “Max Payne” series. “Alan Wake” immerses players in an intense and expansive cinematic world that enables players to explore the hyper-realistic and interactive environments. “Alan Wake” is episodic-based with a deeply engaging and suspenseful storyline unveiling new twists and profound character revelations at every turn, rated T for Teen. For more information, please visit AlanWake.com.
MotoGP 09/10 is second demo released this week via the Xbox Live Marketplace for Xbox 360. The demo allows you to test ride the 125cc, 250cc and GP class bikes AND experience the challenge of three different game modes.
MotoGP 09/10 will see the introduction of a fully realized Career Mode where players take part in the ultimate MotoGP world championship, competing in actual races and managing all aspects of their team. Gamers will hire engineers, team managers and press officers, all of which have a real impact on their career as a racing pro.
Content: MotoGP 09/10 DEMO Price: Free Availability: All Xbox LIVE regions Dash Text: Get the new MotoGP 09/10 demo now and test ride the 125cc, 250cc and GP class bikes AND experience the challenge of three different game modes , including; ‘Championship’, ‘Time trial’ and ‘Arcade’. Racing on the world famous Mugello circuit this impressive demo gives you a chance to sample the best MotoGP game to date and the best racing action on two wheels
Stay tuned to the 360-HQ homepage for all the latest xbox 360 info no matter what it may be and don't forget to check out the FREE 360-HQ Toolbar for Internet Explorer & Firefox. The 360-HQ Toolbar has over 150 FREE online hi-score flash games built in, with local weather, radio stations, Xbox LIVE friends, achievements, 360-HQ Site menu, news, achievements, trailers and much much more. Check it out!
Chris Priestly has just announced via the bioware forums that a new armor and weapon DLC pack are being released tomorrow for all Mass Effect 2 fans.
On Tuesday February 09 2010 Mass Effect 2 fans will be able to get the new Cerberus Assault Armor and M-22a Eviscerator Shotgun DLC fof free through the Cerberus network. It should be available for all fans, both on PC and Xbox 360 at 12:00pm Mountain Standard Time.
Cerberus Assault Armor
Cerberus assault armor is designed for shock troops, who are expected to turn the tide of battle against creatures or forces that would decimate normal soldiers. The troops demanded three things in its design: shields, armor thick enough to last against a superior foe, and a rechargeable pack to extend a heavy weapon power cell. The only drawback of the armor is its weight, which the troops carry as a point of pride. They have a saying: "Out of shape going in, in shape coming out."
* Increases heavy weapon ammo capacity by +10%
* Increases shields by +10%
* Increases health by +10%
M-22a Eviscerator Shotgun
The M-22a Eviscerator Shotgun is a longer-range shotgun with armor-piercing loads. This design also violates several intergalactic weapons treaties, so the M-22a is not distributed to militaries.
ddxcb has released a Fan Speed Patcher for 16mb NANDs. There's not much more information on this release but anything we can find will be added to our homebrew database linked below.
Patch Autospeed.xex and run it for 100% fan speed.
Edit1: added 80% and 90% only for 16MB NAND's.
Edit2: added 50,60,70% speed, only for 16MB NAND's
16mb nand
----------------
0xFF7E11 = CPU fan speed overide
0xFF7E12 = GPU fan speed overide
512mb nand
----------------
0x3DBF011 = CPU fan speed overide
0x3DBF012 = GPU fan speed overide