360 Modification Disc
Current Version: v1.6 Rev2 | Written by FrostyTheSnowman
360 Modification Disc v1.6 Revision 2 by FrostyTheSnowman
Features:
- Complete Modding Solution for Samsung/BenQ/Lite-On
- iXtreme v1.6 (12x) Firmware
- Powerpoint-style GUI
- Supports Samsung TS-H943
- Supports BenQ VAD6038
- Supports Lite-On DG-16D2S
- Supports Previously Modded Drives
- Supports Previously Spoofed Drives
- 100% DOS Based Dumping & Flashing
- Supports FAT, FAT32 & NTFS Filesystems (WinXP/Vista 32-Bit & 64-Bit)
- Fully Automatic Dumping & Flashing
- Step-by-Step Instructions
- Backup of all drive-related files to HDD
Changes in v1.6 Revision 2:
- Replaced HIMEM.SYS with FDXXMS.SYS (better memory management)
- Typo fixed in HTML code (thanks yaywoop!)
- General code cleanup on all scripts
- Powerpoint-style GUI added
- Disclaimer screen added
Changes in v1.6:
- Updated all firmware to iXtreme v1.6
- 0800 Mode for Samsung/BenQ/Lite-On (thanks to iXtreme v1.6)
- Added 'Donations' screen, to show my appreciation :)
Changes in v1.53:
- Replaced MTKFlash for DOSFlash
- Improved Samsung Detection
Changes in v1.52:
- Fixed lockup/freezing issues with NTFS drives
- Improved BenQ/Samsung dumping/flashing stability
- Replaced MS-DOS with FreeDOS (more stable)
Changes in v1.51:
- Updated all firmware to iXtreme v1.51
- 100% Support for all PC SATA & IDE DVD-ROM drives
Changes in v1.5 Revision 2:
- Improved dumping/flashing speeds for BenQ/Samsung drives
- Added 'user firmware dump verification' prompt to prevent possible BenQ bricking
- Revised menus and more detailed drive flashing/dumping instructions
Changes in v1.5 (Public Release):
- Initial release
NOTE: This disc requires a VIA VT6421 PCI SATA (or compatible) card
installed, and an NTFS or FAT32 formatted HDD/partition as the
'C:' drive for this disc to work properly.
NOTE 2: This disc *might* work with other types of SATA chipsets/cards,
but it is recommended that you use a VIA VT6421 SATA card.
NOTE 3: USB serial adapters are NOT compatible with this disc!
Usage:
- Make sure you have a VT6421 (or compatible) PCI SATA card installed in your PC
- Burn this ISO, and boot this disc in your PC
- Follow the prompts to mod any Samsung, BenQ, or Lite-On XBOX 360 DVD-ROM drive
- All firmware dumps, modified firmware, and other files related to the drive being
modified will be placed in the following directories on your 'C' drive:
Samsung TS-H943 - C:\SAMFILES
BenQ VAD6038 - C:\BENFILES
Lite-On DG-16D2S - C:\LONFILES
Disclaimer:
I take absolutely no responsibilty for the use of this disc by anyone. Use at your own risk!
Special Thanks & Credits:
Team HyperX - For the awesome iXtreme v1.6 firmware used by this disc
FreeDOS Project - For the FreeDOS Operating System used by this disc
Winternals - For the NTFSDOS driver used by this disc (NTFS Support)
Dennis Bareis - GETRESP (used to input variables into MS-DOS batch files)
Franck Uberto - XMSDSK (used to create a RAMDISK under MS-DOS)
Geremia, Modfreakz, Podger, Redline99 and Tiros - DOSFLASH
Caster420 - Firmtool (Samsung/BenQ/Lite-On iXtreme firmware generating)
TJ - DVDKey & DummyGen (used to dump firmware for the Lite-On drive)
DuggyUK - For information on El Torito HDD Emulation used by this disc
|
|