Joined: Mar 06, 2004 Posts: 699 Location: Cherry Hill, NJ, USA XP: 46,170
Posted: Wed Nov 16, 2005 4:24 pm Post subject: Backlight X,Y,A,B buttons on controller
Does anybody know if i can solder a red, green, blue, and yellow LED together onto one resistor and solder it to the 5v power supply on the controller PCB board. Bare in mind that i also have 4 red LED's inside the X button in the controller's center. I wanna backlight the buttons but don't want to have 4 seperate resistors for them all.
Any help would be greatly appreciated.
thanks
Pred _________________________________________________________ Predtech
HQ Network Moderator
sjohn Moderator
Joined: Oct 16, 2004 Posts: 1472 Location: Alabama XP: 45,042
Posted: Wed Nov 16, 2005 7:12 pm Post subject:
I think you would probably need to put the resistor in series then line the LEDs up in parralel to make it work. Check this website out: http://www.theledlight.com/ledcircuits.html _________________________________________________________
Predtech Moderator
Joined: Mar 06, 2004 Posts: 699 Location: Cherry Hill, NJ, USA XP: 46,170
Posted: Wed Nov 16, 2005 7:23 pm Post subject:
Now i'll be honest with you bro, i'm not the sharpest tool in the box when it comes to electrical wiring so am i right in saying that i'd basically have to solder a resistor to the 5v power output then run a wire along all the anodes and then also run a seperate wire along all the cathodes to the ground????
The last thing i want to do is blow myself up (a little hadr to do with a 5v power supplu, but you get my drift)
Thanks
Pred _________________________________________________________ Predtech
HQ Network Moderator
sjohn Moderator
Joined: Oct 16, 2004 Posts: 1472 Location: Alabama XP: 45,042
Posted: Wed Nov 16, 2005 7:46 pm Post subject:
Instead of the battery, you'll have the +/- of the 5v leads. Should be basically the same, just make sure that the resistor is in between the power and the first led on either side negative or positive. Then put all the anodes and cathodoes up on the same wire, the end of the wire should end with the last LED.
You could actually just hook up each anode and cathode together along with the power wire. _________________________________________________________
Predtech Moderator
Joined: Mar 06, 2004 Posts: 699 Location: Cherry Hill, NJ, USA XP: 46,170
Posted: Wed Nov 16, 2005 7:49 pm Post subject:
Perfect, thanks brother, you've solved it for me. I'm going to go and order those lights right now and i should have it all installed by this weekend. I'll repost here and let you guys know how i got on.
Thanks Sjohn
Pred _________________________________________________________ Predtech
HQ Network Moderator
sjohn Moderator
Joined: Oct 16, 2004 Posts: 1472 Location: Alabama XP: 45,042
Posted: Wed Nov 16, 2005 7:53 pm Post subject:
Wait before you order, this is assuming that you are using all the same color (each color pulls a different amperage). So either use all white LEDs or tell me what the amperage of the LEDs you will be using, then i'll tell you what resistors you'll need (if they are different colors, you'll have to attach a different resistor to each leg).
Well you could also see what LED needed the most resistance, and use that one according to the original plan, but the others wouldn't shine as bright. I think using white leds would be the best bet. _________________________________________________________
Predtech Moderator
Joined: Mar 06, 2004 Posts: 699 Location: Cherry Hill, NJ, USA XP: 46,170
They are all different colours but all exactly the same specs. Let me know before i order them and mess up please.
Thanks
Pred _________________________________________________________ Predtech
HQ Network Moderator
sjohn Moderator
Joined: Oct 16, 2004 Posts: 1472 Location: Alabama XP: 45,042
Posted: Wed Nov 16, 2005 8:56 pm Post subject:
As long as they have the same specs you are good to go, I'm going to look those over, I'll post back if you shouldn't order. _________________________________________________________
Predtech Moderator
Joined: Mar 06, 2004 Posts: 699 Location: Cherry Hill, NJ, USA XP: 46,170
Posted: Wed Nov 16, 2005 9:03 pm Post subject:
Thanks brother, i appreciate the help. I'm looking forward to teh tourney on Friday. I'm probably going to be the lamb fro the slaughter, or then again maybe not. To be honest it'll be my first ever Halo 2 game online with anyone else, so we'll see.
Thanks Bro
Pred _________________________________________________________ Predtech
HQ Network Moderator
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum