HAHAHA! First mod for 360 and it's not even on shelves yet.

Date: Wednesday, October 26 @ 09:18:00 UTC
Topic: Xbox 360

Llamma's first Xbox 360 mod is completed and we are very pleased. Take a look at the first blue lighted Xbox 360 button controller around; with blue status LED's as well. I was surprised that the actual xbox jewel/360 button was not lit up in any fashion right from the box. Instead four led's surround the jewel to indicate which player/port you are; but they don't really light up the 360 button very well. Also the four led's are only on when you first plug it in, then only one will stay illuminated to show what player you are. This really eliminates any of the light the button may have been picking up when all four were on :(



We'll we can change that ;) Out with the old green..



In with the new blue!!









Adding four 3mm blue led's rigged up inside the 360 button gives it a beautiful glow.. so much more sexy than it was..mmmmm! The Llamma doesnt stop there though folks, cuz at Llamma it's always ON! Changing the green port/status led's to blue is a must! This proved to be a two person job on this one because they are freakin tiny surface mount led's. With us both sporting an iron we could safely lift the old green ones off to make room for the blue. You can expect the Llamma to have all the supplies needed for this mod as well as a tutorial soon! If you just plain dont care to try to solder super tiny led's go through all the rest of the mumbo jumbo you can purchase pre-modded lighted xbox 360 controllers in our shopping cart.




News-Source: http://www.llamma.com



(Shark2th note: Modding instructions are also available by clicking your selection below.)




Xbox 360 Wired Controller Disassembly


How to properly wire LED's



This article comes from 360-HQ.COM:
https://www.360-hq.com

The URL for this story is:
https://www.360-hq.com/article210.html