Talismoon ElectroTwister Kit available now from Talismoon
Date: Thursday, May 03 @ 21:09:41 UTC
Topic: Hardware
Now you too can "bend light". The Electrotwister provides safe, cool, flexible accent lighting for any Xbox 360 mod installation.
Safely route the light around corners to trace major components, or use as an underglow or other indirect lighting.
The Electrotwister is cool to the touch and can fit almost anywhere!
The electrotwister is the most versatile lighting mod on the market today. It is a wire whose insulation glows brightly when powered by low voltage current. It requires no soldering, it is extremely easy to install. Can be used for highlighting details, or indirect lighting. It is recommended that you cover the cable with heatshrink or electrical tape in places that you don't need to see it glowing. A perfect mod for people who feel that typical case mods are limiting or too standardized.
IMPORTANT INFORMATION
1) No soldering is required, just open your xbox 360 and plug in the electrotwister.
2) Cover parts of the wire that you do not want people to see glowing with electrical tape or heat shrink tubing.
3) You can cut the electrotwister with scissors, but terminate the cut end properly you can cover the cut end with electrical tape).
4) Fix the electrotwister into place with non-conductive tape or a drop of epoxy super glue is NOT recommended).
Talismoon Website
|