|
|
samsung ms28 using nforce chipset without un soldering vcc using dos flash
Published on 02-17-2009
" THANKS BOBBY45211!! I DIDNT WANT TO SOLDER EITHER, I FOLLOWED YOUR TUTORIAL AND IT WORKED A TREAT, ONLY PROBLEM I HAD WAS THAT I HAD TO USE MANUAL MODE AS DOSFLASH WOULD JUST HANG ON THE DOSFLASH COMMAND, DOSFLASH 16 IS PURE BRUTE FORCE FLASHING,I HAD PROBLEMS WITH LITEON BUT DOSFLASH 16 SAVED THE DAY, ANYWAYS THIS IS WHAT I DID!
1- CREATE USB BOOTABLE MEMSTICK USING IPREP006,
2- DELETED ALL FILES OFF MEM STICK AND REPLECED WITH DOSFLASH 16 + DOSFLASH.TYP,
3- BOOT PC WITH 360 ON AND ENTERED BIOS SCREEN TO BOOT FROM USB"REMOVABLE"
4 - SAVED AND CONTINUED,
5- PC SHOULD BOOT INTO COMMAND PROMPT, YOU COULD TRY THE AUTO COMMAND DOSFLASH BUT FOR ME IT DIDNT WORK JUST HUNG,
6- TYPED COMMAND DOSFLASH R 09E0 1 A0 0 0 4 ORIG.BIN 0 BUT BEFORE HITTING ENTER POWER DOWN THE 360 DRIVE. JUST BEFORE WE CONTINUE 09E0 IS MY DRIVE PORT AND ORIG.BIN IS WHAT IM NAMING MY OUTPUT READ FILE
7- HIT ENTER NO DRIVE DETECTED COZ ITS NOT TURNED ON YET. ASKED IF I WANT TO USE BENQ MAGIC KEY OR SOMTHING, DOESNT MATTER TYPE N FOR NO,ASKED ME TWICE ANYWAYS AND I SAID NO, THEN IT ASKS IF YOU WANT TO RESEND UNTIL DRIVE IS DETECTED!
8- TYPE Y FOR YES THEN ENTER COUNT T0 13 OR 15 SECS THEN TURN ON 360 DRIVE, DRIVE SHOULD READ SUCCESSFULLY WITH NO ERRORS AND A DATA SUM.
9- I WOULD STRONGLY CONSIDER REBOOTIN INTO WINDOWS NOW AND COPYING YOUR ORIG.BIN LOTTS N LOTTS THEN REPEAT FROM PROCESS 3- THIS GIVES YOU 2 READS OF YOUR DRIVE WHICH YOU CAN COMPARE BEFORE ERASING AND FLASHING.
10- I HACKED MY FIRMWARE AND COMPARED BOTH DUMPS USING JUNGLEFLASHER BUT YOU COULD USE FIRMTOOL 1.3 AND HEX EDIT TO COMPARE, I DONT NO HOW TO DO THAT SO I INSTALLED PORT32 + JUNGLEFLASHER,
11- IF YOU BOOT JUNGLEFLASHER AND LOAD YOUR 1ST DUMP IMAGE FILE ORIG.BIN YOU WILL BE ABLE TO SEE YOUR DRIVE KEY + DETAILS, WRITE THESE DOWN THEN LOAD YOUR SECOND DUMP IMAGE OF ORIG.BIN, IF BOTH DUMPS HAVE THE SAME KEY + DETAILS THEN I WOULD SAY YOU HAVE HAD A GOOD DUMP! HA HA! IF NOT THEN I WOULD TRY HAVING A FEW MORE DUMPS BEFORE FLASHING AS THERS NO GOING BACK WITH A BAD DUMP, IF SUCCESSFUL WITH IMAGE OF GOOD DUMP ORIG.BIN LOADED THEN CLICK LOAD TARGET FIRMWARE, FIND YOUR LATEST FIRMWARE AND OPEN IT, NOW CLICK SPOOF SOURCE TO TARGET AND SAVE THE FILE, SHOULD SAVE AS SAM_CFW.BIN.
12- PLACE THIS FILE BACK ON USB STICK, CLOSE DOWN AND ENTER BIOS AGAIN TO BOOT FROM USB"REMOVABLE" SAVE AND REBOOT WITH 360 TURNED ON! ENTER COMMAND DOSFLASH E 09E0 1 A0 0 0 4 D8 0 BUT BEFORE HITTING ENTER POWER DOWN XBOX.
13 - NO DRIVE DETECTED AS NOT CONNECTED ASKED IF YOU WANT BENQ MAGIC KEY OR SOMETHING TYPE N FOR NO USUALLY TWICE THEN ASKS IF YOU WANT TO RESEND UNTILL DRIVE DISCOVERED SELECT Y FOR YES THEN COUNT TO 13 OR 15 SECONDS AND POWER UP THE 360 DRIVE, DRIVE SHOULD ERASE FINE, IT IS IMPORTANT TO ERASE THE DRIVE BEFORE FLASHING, IN MY FIRST ATTEMPT I DIDNT ERASE THE DRIVE AND GOT 4019 ERRORS AFTER FLASH AND DRIVE WAS MAKING FUNNY NOICES AND BASICALLY F!@CKED, FOLLOWED PROCESS 12, DRIVE ERASED AND FUNNY NOICES STOPPED.
14- AFTER ERASE POWER DOWN 360 AND TYPE DOSFLASH W 09E0 1 A0 0 0 4 SAM_CFW.BIN 0 AND HIT ENTER YOULL GET THE SEND MAGIC KEY THING AGAIN TYPE N FOR NO ON BOTH OCCASSIONS THEN WHEN ASKED TO RESEND UNTILL DRIVE RESPONDS TYPE Y FOR YES THEN COUNT 13 TO 15 SECS AND POWER UP 360, DRIVE SHOULD WRITE ALL 4 BANKS WITH NO ERRORS AND A DATASUM, POWER DOWN 360 +PC AND RECONNECT DRIVE TO 360! ALL BEING WELLL ALL SHOULD WORK FINE.
ITS SO IMPORTANT TO KEEP YOUR ORIG.BIN FILE SAFE, IF YOU EVER LOSE YOUR DRIVE DUE TO WEAR AND TEAR IN THE FUTURE U CAN REPLACE IT USING YOUR ORIG.BIN FILE, ALSO GET YOURSELF A SAMSUNG KREON DRIVE PREFLASHED FROM THE NET, MAKES BACKING UP GAMES A BREEEZ MINE COST £21 INCLUDING POSTAGE AND PACKAGING FROM A UK SITE!
HEY THANKS AGAIN TO EVERYONE WHO PUTS THERE MIND INTO THE MATRIX TO MAKE THIS WORK AND THANKS TO ALL THE PEPES ON VARIOUS FORUMS WITH HELP WITH MANUAL DOSFLASH COMMANDS!
AND THANKS AGAIN TO BOBBY45211 FOR HIS WORK WITH NFORCE CHIPSET AND GETTING THIS 15 SEC TRICK DOWN RESPECT! "
|
|
Not a registered user on HQ??
 Why not registered for free by clicking here.
If you continue to experience problems once you have registered and activated
your free user account please contact us from our feedback page. |
|
| |
 | phillyfog
UK
0 XP
HQ Member since Apr 02, 2008
OFFLINE 
|  Forum Posts: 0
News Articles: 0
Clans: 0
Game Collection: 0
Game Ratings: 0
| Blogs: 1
Tutorials: 0
Downloads: 0
Cheats: 0
Reviews: 0
|
Location: UK
Interests:
Gaming, Xbox 360
|
 |
HQ Network: 8,895 | 
Guests: 5401 |
Members: 0
Post a Comment
