This release has not been tested yet, but as the original Xbox DVD firmware mod released by the same person (Commodore4Eva) was working, chances are high this one will work too.
The modified DVD firmware has been released for the Toshiba-Samsung H943 Xbox 360 DVD drive (it will ONLY work on that drive - the Hitachi-LG drives will need their own modified firmware). Just like Commodore4Eva's modified Xbox1 FW, it will need raw dumps, some patching (security sector on ISO and DVD drive key on firmware) and DVD+DL recordable discs to work.
Release comes with tools to make this all as easy as possible. Also included is a 2nd firmware that will allow you to extract the security sector (what you have to patch on the raw ISO) from an original discs with your TS-H943 drive connected to a PC.
Here it is, the long awaited World first Xbox 360 backup firmware modification to boot all game backups!
Features:
- Boots all Xtreme Xbox 360 backups
- Boots all Xtreme Xbox 1 backups
- Boots all Xbox 360 originals
- Boots all Xbox 1 originals on Xbox 360
- Xtreme0800 extraction firmware enables drive to function natively under Windows without any hardware conversion/adaptors
- Use on Xbox Live at own risk
Technical details:
- Reads Xbox 360 security sector from PSN 04FB1F (Layer 0)
- Reads Xbox 1 security sector from PSN 605FF (Layer 0)
- Security sector must be extrated using Xtreme0800 360 firmware for Xbox360 games and Xbox 1 games
- Will not boot Xbox 1 backups made with Xbox1 605b 0800 firmware (maybe in future release)
Flashing your drive:
Advisable to make a backup of your dvd drive firmware first ("mtkflash r /m orig.bin"). Please make sure you hexedit the Xtreme.bin firmware (not Xtrm0800.bin firmware) to include your dvd drive key from your original firmware (usually at $4000-4200).
Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360 Power on
Xbox 360 Power on PC Boot with standard dos boot disk with included mtkflash utility.
Run "mtkflash w /m firmwarename.bin" with relevant firmware file (Xtreme.bin for running backups or Xtrm0800.bin for security sector extraction)
Extracting Security Sector:
Ensure DVD drive has been flashed with Xtrm0800.bin firmware. Drive can now work under Windows.
Insert original game disk into drive and wait for windows to detect disk change.
Run DVDinfoPro.
Enter the following four custom cdb commands:
AD 00 FF 02 FD FF FE 00 08 00 01 C0
AD 00 FF 02 FD FF FE 00 08 00 03 C0
AD 00 FF 02 FD FF FE 00 08 00 05 C0
AD 00 FF 02 FD FF FE 00 08 00 07 C0
Then save hexadecimal display as bin file as SS.bin
Creating a game backup:
Ensure DVD drive has been flashed with Xtrm0800.bin firmware. Drive can now work under Windows.
Extract Isobuilder.rar
Insert original game disk into drive and wait for windows to detect disk change
Run DVDinfoPro
Enter the following custom cdb command to unlock drive: (game data visable)
FF 08 01 01
Run Isobuster
Right click on DVD and select Extract From-To
Click Length and enter number of LBAs as follows:
Xbox 1 Original Number of LBA to read 3431264 decimal
or
Xbox 360 Original Number of LBA to read 3567872 decimal
Select User Data (2048 bytes/block)
Click Start Extraction
Enter filename as game.iso and click Save
Upon read error dialogue box choose fill with blank zeros for sector and select use this selection for all errors
Copy game.iso and ss.bin to the relevent isobuilder directory (Depending on Xbox 360 or Xbox 1 game)
Run build360.bat (Xbox 360 game) or build.bat (xbox 1 game)
Ensure your burner will set the booktype of DVD+R DL to DVDRom
Burn with CloneCd and choose the image.dvd file
Thanks to everyone at Xboxhacker.net for all their discussions. Now you guys will have to get homebrew running. Next on the list will be the PS3 and this one will be done much quicker (once it comes out!)
News-Source:
http://www.xboxhacker.net
360-Hq.Com Forum Topic:
http://www.360-hq.com
(
Digg It! | 
GameGrep It! )
Discuss in our Xbox 360 Forums: here
HQ Network: 1661 | 
Live Chat: 0 |
Guests: 1099 |
